Comparison

Meaco Arete Two 20L vs Pro Breeze 20L Premium vs EcoAir DD1 Simple MK3: specifications

Manufacturer-listed specifications for Meaco Arete Two 20L, Pro Breeze 20L Premium, EcoAir DD1 Simple MK3, presented by product with source links.

Products referenced

The products in this article

Use these as starting points, then open the product page for product details and retailer options available in your country. Product pages clearly label retailer links that may earn commission.

Specifications side by side

The approved specifications are grouped by topic below. Entries may describe different features or use different units. A missing entry means this article has no approved claim for that topic, not that the product lacks a feature.

Manufacturer-listed specifications by topic
TopicMeaco Arete Two 20LPro Breeze 20L PremiumEcoAir DD1 Simple MK3
Capacity
  • The MeacoDry Arete Two 20L has a water tank size of 4.8 litres.
  • Specified extraction rate is 12 L/day at 27°C and 60% RH, and 20 L/day at 30°C and 80% RH.
  • Maximum airflow is 150 m³/h on the low fan speed and 255 m³/h on the high fan speed.
  • The maximum room size is up to 30 m² (323 sq ft).
  • The dehumidifier covers spaces of up to 60 m².
  • Moisture removal is 7.5 litres per day, measured at 20°C and 60% relative humidity.
Dimensions
  • Dimensions (height x width x depth) are 618 x 366 x 272 mm.
  • The dehumidifier measures 35.5 x 20 x 60.8 cm (LxWxH).
  • Net dimensions (W x H x D) are 290 x 475 x 175 mm.
Weight
  • The MeacoDry Arete Two 20L weighs 15.1 kg.
  • The dehumidifier weighs 13 kg.
  • The net weight of the unit is 6 kg.
Power
  • The specified operating temperature range is 5°C to 35°C.
  • The power supply is 220-240 V, 50 Hz, via a mains lead.
Not covered in this article’s approved evidence.
  • The specified operating temperature range is 1 to 35 °C.
Noise
  • Noise level is specified from 38 dB.
Not covered in this article’s approved evidence.
  • The noise level is specified as 34/47 dB(A).
Documented modes
  • Available modes are Smart humidity, Air purification, Smart energy, Night and Continuous.
Not covered in this article’s approved evidence.
  • An automatic stop feature shuts the unit off when ambient humidity reaches the set level and resumes automatically when humidity rises again.
Documented controls
  • The variable humidistat can be set between 40% RH and 70% RH.
Not covered in this article’s approved evidence.Not covered in this article’s approved evidence.
Documented components
  • A washable dust filter and a HEPA filter are included; a charcoal filter is optional and sold separately.
  • Filtration consists of a washable nylon filter plus 2 carbon filters.
  • The dehumidifier has an oscillating louvre that distributes air through the room.
Not covered in this article’s approved evidence.
Documented design detailsNot covered in this article’s approved evidence.Not covered in this article’s approved evidence.
  • Tilt-Over Stop Protection automatically turns the unit off if it is tipped over.
SourceMeaco Arete Two 20L manufacturer sourcePro Breeze 20L Premium manufacturer sourceEcoAir DD1 Simple MK3 manufacturer source

Meaco Arete Two 20L

  • The MeacoDry Arete Two 20L has a water tank size of 4.8 litres.
  • The specified operating temperature range is 5°C to 35°C.
  • Dimensions (height x width x depth) are 618 x 366 x 272 mm.
  • The MeacoDry Arete Two 20L weighs 15.1 kg.
  • Specified extraction rate is 12 L/day at 27°C and 60% RH, and 20 L/day at 30°C and 80% RH.
  • Maximum airflow is 150 m³/h on the low fan speed and 255 m³/h on the high fan speed.
  • The variable humidistat can be set between 40% RH and 70% RH.
  • The power supply is 220-240 V, 50 Hz, via a mains lead.
  • Noise level is specified from 38 dB.
  • Available modes are Smart humidity, Air purification, Smart energy, Night and Continuous.
  • A washable dust filter and a HEPA filter are included; a charcoal filter is optional and sold separately.

Pro Breeze 20L Premium

  • The dehumidifier measures 35.5 x 20 x 60.8 cm (LxWxH).
  • The dehumidifier weighs 13 kg.
  • Filtration consists of a washable nylon filter plus 2 carbon filters.
  • The maximum room size is up to 30 m² (323 sq ft).
  • The dehumidifier has an oscillating louvre that distributes air through the room.

EcoAir DD1 Simple MK3

  • The dehumidifier covers spaces of up to 60 m².
  • Moisture removal is 7.5 litres per day, measured at 20°C and 60% relative humidity.
  • The specified operating temperature range is 1 to 35 °C.
  • Net dimensions (W x H x D) are 290 x 475 x 175 mm.
  • The net weight of the unit is 6 kg.
  • The noise level is specified as 34/47 dB(A).
  • An automatic stop feature shuts the unit off when ambient humidity reaches the set level and resumes automatically when humidity rises again.
  • Tilt-Over Stop Protection automatically turns the unit off if it is tipped over.

Manufacturer sources

Bottom line

These are manufacturer-listed specifications. This overview does not report hands-on testing or make a recommendation.

Methodology

How this article was prepared

This is a research-based MainBuyer article using current web evidence, official product information and verified MainBuyer product records. It does not claim hands-on laboratory testing.

See how we review and our editorial policy.